Installation Without Tools
What is CUT@HOME pleated shade
These light weight pleated shades can be CHT@HOME with a straight edged kitchen knife and installed with no tools, brackets or screws. No need to drill holes either. The installation is quick and easy.
It comes in two colors, white and fawn, and in light filtering or blackout.
CUT@HOME shades are designed for both inside and outside mounting. The inside mount needs 1-1/2" depth for a flush mount.
One height fits all - Cut@Home cordless pleated shades with cordless operation allow the shade to stop at any height up to 64" tall. You just lower the shade to the desired length.
The cutting guide, double sided tape, and installation instructions are included.
Vinyl headrail and bottom rail.
100% polyester non‐woven fabric
Minimum width: 19"
Maximum width: 60"
Height: covers up to 64"
6pcs/ per case
The shade can be mounted either inside or outside mount. A measuring tape is attached to the headrail. No light leak from the top.
What Are Included
The package includes a pleated shade, a cutting guide, a double-sided tape, and instructions.
3 Easy Steps
Step 1 - CUT
Cut the shade with a sharp knife in a rocking motion carefully (a non-serrated knife works best).
Step 2 - Tape & Peel
Tape the double-sided tape to the top or back of the headrail, depending on where you plan to install it.
Step 3 - Attach
Attach the shade to the top of the window frame or to the wall above it.
The videos below demonstrate how to cut the shade with a kitchen knife and install it either inside or outside mount.